Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Everett
Chimney repair in Everett typically costs between $450 and $3,800 depending on scope, with mortar repointing on the lower end and full rebuilding on the higher end. Most Everett homeowners get a written estimate the same day they call, and our crews are dispatched from our Seattle office with routing optimized for Snohomish County traffic patterns. Call (425) 642-3485 for a free estimate.
We’ve worked on chimneys from Bayside’s timber-boom cottages to the ranches along Evergreen Way, and the problems we find in Everett aren’t the same as what we see inland. The salt air coming off Port Gardner Bay, the shared flue stacks in North Everett’s attached worker housing, and the wet-weather heating season that runs October through April all create repair patterns specific to this city. Our Chimney Repair team knows what to look for because we’ve documented it on thousands of Everett inspections since 2009.
Why Level Two Chimney Kirkland Is Everett’s Preferred Chimney Repair Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Everett’s 1910s-1940s housing stock. Our customers in the Bayside neighborhood and along Rucker Avenue leave reviews that specifically mention the photo documentation we provide - Clause 4 of the Haven Standard requires a photo record on every job, and Everett homeowners use those images to understand what they’re paying for.
Response time to Everett averages same-day or next-day for estimates, with crews already staged for Snohomish County work. We don’t subcontract; our background-checked, uniformed technicians carry license information on every page of their documentation, and you’ll get a text when your tech is en route.
What separates us in Everett is that we name the problem and the price before any work starts. Haven Standard Clause 1 requires a written price, written scope, and written warranty delivered before anyone picks up a trowel. No exceptions. Everett homeowners bring us competitor estimates for our Free Second Opinion program regularly - especially after another company has recommended a full rebuild without camera evidence.
Our Chimney Repair Services in Everett
Chimney Rebuilding
Full chimney rebuilding in Everett runs $2,800-$3,800 and becomes necessary when spalling brick, deteriorated mortar, and compromised structural integrity make spot repairs insufficient. In North Everett’s Bayside neighborhood, we regularly rebuild chimneys on 1920s worker cottages where the original brick has absorbed nearly a century of Puget Sound moisture. The salt-laden marine air off Port Gardner Bay accelerates mortar decay far beyond what you’d see in inland Snohomish County cities like Snohomish or Monroe. Every rebuild includes a new crown with proper drip edge, a DuraFlex liner sized to your appliance, and the documented photo record required by Haven Standard Clause 4.
Chimney Waterproofing
Chimney waterproofing in Everett costs $650-$1,200 depending on surface area and accessibility, and it’s often the most cost-effective intervention for homes with early-stage moisture intrusion. We apply vapor-permeable sealants from HeatShield and Copperfield that let the brick breathe while blocking liquid water - critical in Everett’s climate, where 35-38 inches of annual rain concentrate in the October-April heating season. Waterproofing is particularly valuable for South Everett ranch homes with 1950s-1970s brickwork that wasn’t designed for modern freeze-thaw cycling. We won’t sell waterproofing if a camera inspection shows the brick is already saturated; in those cases, we’ll show you the footage and recommend rebuilding instead.
Flashing Repair
Flashing repair in Everett ranges from $450 for simple counter-flashing replacement to $1,400 for full step-flashing and cricket installation on steep-pitch roofs. Everett’s wind-driven rain off the bay tests flashing integrity harder than sheltered inland locations. We use copper and galvanized steel flashing from Famco, cut and formed on-site to your roof pitch. In North Everett’s tight street grids with limited roof access, our crews carry specialized ladder configurations to reach chimneys between attached properties safely. Every flashing repair includes a water-test and photo documentation of the sealed joints.
Mortar Repointing
Mortar repointing in Everett runs $850-$2,200 depending on the extent of joint failure and scaffold requirements. The lime-based mortars used in 1910s-1940s construction are softer than modern Portland cement mixes, which is appropriate for historic brick but requires matching for durability. We grind out failed joints to proper depth and repoint with mortar matched to the original compressive strength - not harder, which would spall the brick faces, and not softer, which would wash out in the next rainy season.
Spalling Brick Repair
Spalling brick repair in Everett costs $1,200-$2,600 and addresses the freeze-thaw damage that occurs when water-saturated brick faces pop off in sheets. This is common on south- and west-facing chimney exposures in Everett, where afternoon sun drives moisture into the masonry and overnight winter temperatures freeze it. We replace spalled units with reclaimed or matching new brick, never covering the damage with surface coatings that trap moisture inside.
Tuckpointing
Tuckpointing in Everett - the cosmetic refinement of repointed joints with a thin contrasting line - runs $1,100-$2,400 and is typically requested for visible chimneys on historic homes in the Bayside and Riverside neighborhoods where aesthetic integrity matters for property value. We match existing tuckpointing profiles from the 1920s-1940s period.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Everett
We source repair materials through Haven’s buying network to keep customer prices honest: DuraFlex stainless steel liners for relining projects, HeatShield cerfractory sealant for smoke chamber parging and liner resurfacing, and Famco chimney caps and termination hardware. Copperfield supplies our waterproofing agents and crown-forming compounds. These aren’t generic alternatives - they’re the brands specified by manufacturers whose factory-built fireplaces we repair in South Everett’s 1950s-1970s ranch stock. We stock common liner diameters and flashing configurations locally, so Everett jobs aren’t delayed by freight.
Common Chimney Repair Problems We See in Everett Homes
- Shared flue stacks in North Everett’s attached worker cottages let a neighbor’s appliance vent creosote and moisture into your flue, corroding your liner from the inside even if you rarely burn. We inspect the full length with a camera to determine whether separation or individual lining is required.
- Chimney crowns eroded flush with the brick - common after decades of Puget Sound rain and salt air - allow water to sheet directly into the flue, turning residual creosote into an acidic slurry that attacks clay tiles from the outside. This is specific to bayside Everett; inland Snohomish County chimneys don’t suffer the same crown erosion because they’re shielded from that constant salt-and-moisture cycle.
- Retrofitted wood-stove inserts in South Everett’s 1950s-1970s ranch homes were often installed without permits or liner upgrades, leaving undersized or unlined flues that can’t handle the heat and draft of a modern stove. We verify clearances and liner sizing with a camera inspection before certifying any insert for use.
- Failed flashing at the roofline admits water that runs down the exterior brick, saturating the masonry during Everett’s prolonged wet season and accelerating mortar decay from the outside in.
Pricing for Chimney Repair in Everett, WA
| Service | Typical Range in Everett |
|---|---|
| Mortar repointing | $850 - $2,200 |
| Spalling brick repair | $1,200 - $2,600 |
| Chimney waterproofing | $650 - $1,200 |
| Flashing repair | $450 - $1,400 |
| Chimney rebuilding | $2,800 - $3,800 |
| Tuckpointing | $1,100 - $2,400 |
These ranges reflect Everett’s market specifically, including the access challenges of tight North Everett lots and the scaffold requirements of two-story worker cottages. What moves a job toward the higher end: extensive scaffold setup, matching historic brick or mortar, shared-flue separation work, and liner replacement bundled with exterior repair. We deliver a written price before any work starts - Haven Standard Clause 1, no exceptions - and we separate optional items so you can phase the work if budget requires. Call (425) 642-3485 for a free estimate; estimates include the camera inspection and photo documentation.
We Also Serve Cities Near Everett
Our crews work throughout Snohomish County and the Eastside, including Chimney Repair in Everett plus Snohomish, Lynnwood, Bothell, and Kirkland. Scheduling is coordinated from our Seattle office with routing optimized for your location.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Everett
Yes. Shared flue stacks in North Everett’s attached worker cottages allow your neighbor’s exhaust - including creosote, moisture, and combustion byproducts - to enter your flue channel, accelerating liner corrosion and creating fire hazards in your system even if you rarely burn. We were called to a 1922 worker cottage on a tight block in North Everett’s Bayside neighborhood where the homeowner’s neighbor had been running a wood stove into the same shared stack. Our tech found third-degree creosote glazed across the flue liner, and the crown had eroded so far that water was running directly into the flue - converting that creosote into an acidic slurry. We rebuilt the crown, installed a new DuraFlex liner, and separated the flues so each appliance had its own exhaust path. Call (425) 642-3485 if you suspect shared-flue contamination; we’ll camera-inspect both channels and show you the footage.
Everett’s direct exposure to Port Gardner Bay delivers salt-laden marine air year-round, degrading mortar joints and flue liners faster than in any inland Snohomish County city. The 35-38 inches of annual rain concentrate in October through April, precisely when wood-burning is heaviest, so chimneys endure repeated cycles of water saturation followed by high-heat use. This pattern cracks clay flue tiles and spalls mortar joints far faster than in drier Pacific Northwest cities east of the Cascades. Inland Snohomish County chimneys don’t suffer the same crown erosion because they’re shielded from that constant salt-and-moisture cycle. Call (425) 642-3485 for a camera inspection that documents your specific moisture and heat-cycling damage.
It means the concrete or mortar crown that should overhang the brick by at least two inches - creating a drip edge that sheds water away from the flue - has eroded down to the same level as the surrounding brickwork. In North Everett’s oldest blocks, this is common after 80-100 years of Puget Sound rain and salt air. Without that drip edge, water sheets straight down the brick and into the flue, converting residual creosote into an acidic slurry that corrodes liner tiles from the outside before you notice any draft or odor problem. Crown rebuilding in Everett runs $1,400-$2,600 depending on size and access. Call (425) 642-3485 and we’ll show you the erosion on camera before quoting replacement.
It needs a camera inspection to determine whether the insert was installed with proper liner sizing and clearances. Many retrofitted wood-stove inserts in South Everett’s 1950s-1970s ranch homes were installed without permits or liner upgrades, leaving undersized or unlined flues that can’t handle the heat and draft of a modern stove. This creates both fire risk and carbon monoxide hazard. We won’t recommend an upgrade without camera evidence you can see; if the existing installation meets code, we’ll document that and you’re done. If not, we’ll quote a DuraFlex liner and proper termination, with written price before work starts. Call (425) 642-3485 to schedule.
Annually, before the heating season begins. NFPA 211 recommends annual Level 2 inspection for all solid-fuel systems, and Everett’s wet-weather heating season - October through April - creates conditions where creosote accumulates heavily while moisture simultaneously degrades the masonry. The combination of heavy use and salt-air moisture exposure means deferring inspection carries higher risk here than in drier climates. Our Level 2 inspection includes camera-scan documentation of the full flue, smoke chamber, and accessible exterior, with photos delivered under Haven Standard Clause 4. Call (425) 642-3485 to book before burning season; estimates are free.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Everett and the greater Puget Sound region since 2009.