Gelco Chimney Liner & Rebuild Nationwide

Gelco Chimney Liner & Rebuild in Kirkland: What to Know First

We provide independent Gelco chimney liner and rebuild service in Kirkland, typically quoting and scheduling within 24 hours of your call, with most liner replacements completed in a single day and full rebuilds taking two to three days depending on weather. Every job starts with a written price, a written scope, and a written warranty before any work begins - no exceptions, no surprises. This page is for Gelco owners in Kirkland, Juanita, and the Rose Hill area who need straight answers about what’s actually wrong with their liner, what it costs, and whether the work can wait. Call (425) 642-3485 for a free estimate.

Call (425) 642-3485

How Gelco Products Fail - and How We Fix Them

• Gelco Ultrastar Pro flexible liners develop longitudinal seam separation after 12-18 years in Kirkland’s wet winters, especially where the flue passes through an unconditioned chase. The 316Ti alloy holds up, but the crimp-lock seam traps condensation that accelerates chloride stress corrosion. We cut back to sound metal and splice in a new Gelco or DuraFlex section with a mechanical expansion joint at the joint.
• Gelco stainless rigid tee assemblies in older Kirkland homes near Juanita Beach suffer bottom-tee rot from acidic condensate pooling where the tee meets the smoke chamber shelf. The tee body looks fine from above; the camera finds the thinning. We replace with a Gelco OEM tee or a HeatShield Cerfractory foam rebuild of the shelf if the tee itself is still serviceable.
• Gelco ProForm rectangular liners distort at the thimble connection in masonry chimneys with settled crowns, common in 1970s Kirkland split-levels. The rectangular form tries to hold shape while the surrounding brick shifts. We pull the liner, stabilize the thimble with a poured crown repair using Copperfield crown seal, and reinstall with a Gelco flex adapter to absorb future movement.
• Gelco top plate and storm collar assemblies leak at the silicone bead after five to seven Pacific Northwest winters, not from the metal but from UV-degraded sealant that lets water track behind the plate. Water stains the exterior chase or interior drywall below. We remove the assembly, inspect the flue wall for hidden spalling, and reinstall with fresh high-temp silicone and a proper drip edge.
• Gelco smooth-wall liners in oil-to-gas conversion jobs (common in Rose Hill and North Rose Hill) were often sized for the original appliance BTU and run too cold with modern high-efficiency equipment. The result is Class III glazed creosote that a brush won’t touch. We verify appliance BTU against liner diameter per NFPA 211, resize with a properly matched Gelco or Olympia Chimney liner, and document the new sizing for the homeowner’s records.

Our Gelco Chimney Liner & Rebuild Process

1. 1
   Level 2 camera inspection. We run a chimney camera the full flue length, document liner condition, joint integrity, and any offset or distortion. You get the footage and a written finding before we talk price.
2. 2
   Written scope and price. We deliver a line-item quote: parts, labor, disposal, and warranty terms. Clause 1 of the Haven Standard requires this in writing before work starts. No verbal estimates, no “we’ll see when we get in there.”
3. 3
   Parts decision. For Gelco repairs, we source OEM Gelco components through Haven’s buying network when available. If Gelco lead times stretch past what’s reasonable for your heating season, we specify DuraFlex or HeatShield equivalents that match or exceed OEM spec and note the substitution in writing.
4. 4
   Repair or rebuild. Liner replacement: pull old, install new, connect appliance with proper adapter, seal top plate. Partial rebuild: replace damaged courses, pour new crown, reinstall liner. Full rebuild: dismantle to sound masonry, reconstruct with matching brick, install new Gelco or specified liner system.
5. 5
   Smoke test and documentation. We pressure-test or smoke-test per local code, then deliver a photo record of completed work, product labels, and warranty card. Clause 4 of the Haven Standard requires this documentation on every job.
6. 6
   365-Day Done Right Promise. If anything in our scope fails due to workmanship or materials, we make it right. The warranty terms are on the same page as the price.

Before

After

What Gelco Chimney Liner & Rebuild Costs in Kirkland

These are Kirkland-market ranges based on jobs we’ve completed in Juanita, Rose Hill, and the Bridle Trails area. Exact pricing depends on what the camera shows. We don’t recommend work the footage doesn’t support, and we don’t price over the phone without seeing the flue. Call (425) 642-3485 for a free estimate - we’ll schedule the inspection, deliver the written quote, and let you decide on your own timeline.

Why Kirkland Homeowners Call Level Two Chimney Kirkland for Gelco Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a meaningful share of those have been Gelco systems in Kirkland’s 1960s-through-1990s housing stock. Corrine Halstead learned the trade at Apex Technical School in Manhattan and has logged well over a decade of hands-on chimney work across the Pacific Northwest. She and her crew know the local pattern: older homes near Juanita Beach where gas conversions left undersized liners, split-levels with settled crowns, and the particular way Gelco seams age in our wet climate.

Our technicians are background-checked, uniformed, and assigned by name. You get a text when they’re on the way, a license number on every page, and a live person when you call - 24 hours a day. The camera doesn’t lie, and neither does the invoice. We also service DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield systems, so if your Gelco parts are backordered, we have qualified alternatives ready and documented.

FAQs