Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterCopperfield Chimney Repair in Kirkland: What to Know First
We provide independent Copperfield chimney repair in Kirkland, WA, with most jobs quoted and scheduled within 24 hours and completed in a single visit. A written price and scope arrive before any work starts, and every repair includes a camera-scan photo record under Haven Standard Clause 4. This page is for Kirkland homeowners who have a Copperfield chimney cap, chase cover, or flashing system that is leaking, rusting, or separating from the masonry, and who want to know what the repair actually involves before calling anyone out. If that’s you, call (425) 642-3485 for a free estimate.
How Copperfield Products Fail - and How We Fix Them
- Copperfield Pro-Form chase covers on 1990s-2010s Kirkland split-levels: The galvanized steel substrate corrodes from the underside first, where condensation collects against the chimney chase in our wet winters. Homeowners often spot rust stains on the siding before they see water inside. We remove the cover, assess the chase framing for rot, and install a replacement in 24-gauge stainless or copper - whatever matches the home’s exposure and your preference. The new cover gets a cross-break and drip edge to shed Kirkland’s persistent drizzle.
- Copperfield standard-duty chimney caps on homes near Juanita Beach and Finn Hill: The 0.023-inch mesh and lid construction holds up fine until a branch strike or until the mounting brackets fatigue from thermal cycling. We’ve found the mounting tabs crack at the weld point after 8-12 years in this climate. We fabricate heavier-gauge replacement brackets or spec a Copperfield HD cap with 0.032-inch mesh and reinforced corners.
- Copperfield pre-fab flashing kits on newer construction (2015-2022): The step flashing pieces are sized for a standard 2-inch projection, but Kirkland’s wind-driven rain on east-facing slopes overwhelms the overlap during our fall storm season. Water gets behind the flashing and into the attic. We remove the kit, install custom-bent step flashing with a 4-inch minimum projection, and counter-flash with a reglet or sealant joint depending on the siding type.
- Copperfield Gelco-compatible chase tops ordered through big-box channels: The aftermarket spec sometimes ships with a lid pitch too shallow for heavy moss debris common in Kirkland’s tree-canopied neighborhoods like Bridle Trails. Water pools, accelerates corrosion, and the lid sags. We measure the existing chase, spec a proper 3/12 minimum pitch, and source through our Haven buying network to keep the price honest.
- Copperfield mortar and crown sealants on older brick chimneys: The elastomeric coating looks intact from the ground but micro-cracks at the crown edge where freeze-thaw cycles concentrate. Kirkland’s temperature swings - 25°F mornings to 45°F afternoons in January - open these cracks wider each season. We grind back to sound masonry, apply a proper Portland-based crown wash with expansion joint, and only use breathable sealants rated for our wet-cold zone.
Our Copperfield Chimney Repair Process
- 1
Call and schedule. A live person answers, day or night. We book a two-hour window and text when the tech is en route.
- 2
NFPA 211 Level 2 inspection. Camera down the flue, photos of the exterior, moisture readings where accessible. We document everything before touching a tool.
- 3
Written price and scope. You get line-item pricing, parts specification (OEM Copperfield or equivalent from DuraFlex, HeatShield, or Gelco through our Haven network), and a 365-Day Done Right Promise. No work starts until you approve in writing - Haven Standard Clause 1.
- 4
Repair and test. We complete the repair, run a water test on flashing and cap work, and verify draft performance if the flue was disturbed.
- 5
Photo record and walkthrough. Before-and-after images, written warranty, and a printed or emailed report. Clause 4 of the Haven Standard requires this documentation on every job.
- 6
Cleanup and follow-up. We haul away old materials and check in at 30 days to confirm the repair is holding through Kirkland’s wet season.
Before
AfterWhat Copperfield Chimney Repair Costs in Kirkland
| Repair Type | Typical Range | What Moves the Price |
|---|---|---|
| Chimney cap replacement (standard) | $340-$580 | Mesh gauge, lid size, access height |
| Chase cover replacement (Copperfield Pro-Form or equivalent) | $720-$1,400 | Material (galvanized vs. stainless vs. copper), chase size, framing repair |
| Flashing repair (partial) | $480-$920 | Number of courses, siding type, rot repair behind |
| Flashing full replacement | $1,200-$2,400 | Roof pitch, chimney width, cricket addition |
| Crown repair with sealant | $380-$650 | Crown size, crack depth, rebuild vs. overlay |
| Brick repointing / spalling repair (small area) | $680-$1,200 | Scaffolding need, mortar match, brick sourcing |
These are real Kirkland prices for Copperfield-compatible work, not teaser rates. We source materials through our Haven buying network specifically to keep customer prices honest. Every estimate is free, written, and binding - call (425) 642-3485 for yours.
Why Kirkland Homeowners Call Level Two Chimney Kirkland for Copperfield Work
We’ve cleaned and inspected chimneys throughout Kirkland since 2009, including a stretch of older homes near Juanita Beach where creosote buildup surprises people who assumed gas inserts had made the problem go away. Corrine Halstead and our crew know Copperfield products from hands-on experience, not a catalog. When a Copperfield part is back-ordered or discontinued, we pivot to quality equivalents from DuraFlex, HeatShield, or Gelco - same spec, honest price, no markup theater.
The 365-Day Done Right Promise means if it’s not done right, we make it right. Background-checked, uniformed technicians. License number on every page. And the camera doesn’t lie, and neither does the invoice - that’s why we put both in your hands before anyone leaves.
FAQs
Copperfield’s warranty on materials is typically limited to manufacturing defects and does not cover installation or field repairs performed by non-authorized parties. As an independent Copperfield service provider, we use OEM-spec or equivalent parts and document everything so you have a record if a defect claim ever arises. Call (425) 642-3485 if you want us to review your original paperwork.
If the mesh is intact and only the mounting brackets are cracked, we can fabricate heavier-gauge brackets and reuse the lid. If the lid is dented, rusted through, or the mesh is separating at the seam, replacement is the honest call. We show you the camera footage and explain both options with prices before you decide.
We source Copperfield-compatible parts through our Haven buying network, including direct equivalents from DuraFlex, HeatShield, Gelco, Olympia Chimney, and Famco. If OEM Copperfield is available and makes sense for your repair, we’ll use it. If lead times are long or the part is discontinued, we spec an equivalent with the same gauge, finish, and wind rating - and we tell you which we’re using and why.
Most cap, flashing, and crown repairs are completed in 2-4 hours. Chase cover replacements on two-story homes may take a full day if framing repair is needed. We give you a time estimate in writing with the price, and we don’t charge more if it runs long.
Yes - because the cap is rarely the only problem. In Kirkland’s wet climate, water that got past a failing cap often has damaged the flue liner or smoke chamber below. Our NFPA 211 Level 2 inspection finds what you can’t see from the roof. We don’t recommend work the camera doesn’t support, and we show you the footage so you can decide what to address now versus monitor. Call (425) 642-3485 to schedule - estimates are free.
Written by Corrine Halstead, Owner, Level Two Chimney Kirkland at Level Two Chimney Kirkland, serving Kirkland and nearby areas.